SPRAY CHARACTERISTICS:
STF spray nozzles produce a flat, fan-shaped spray pattern, similar to the F Series. Spray
angles are available for a 0° solid stream to 90°, measured at 3 bar. Spray angles generally
increase with pressure, as shown in the capacity table below.
Spray density tapers off toward the outside edges of these sprays, to permit overlapping of
spray patterns while maintaining uniform spray density.
TYPICAL APPLICATIONS:
The STF series is designed for applications where space is at a minimum, or where the
nozzles must not protrude from the header. Typically the outer surface of the nozzle is
flush with the outside of the header.
(NOTE: Certain models will protrude slightly).
Download PDF
Flat and Straight Jet Nozzles | Full Cone Nozzles | Air Atomizers | PNR jets | BEX jets | Ikeuchi jets
Copyright 2019 B4S. Website designed by Actusdesign.pl